EKHO EK-WL8-EXP/AU Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Unit Kontrol EKHO EK-WL8-EXP/AU. EKHO EK-WL8-EXP/AU 7 halaman. Wireless expander module
Juga untuk EKHO EK-WL8-EXP/AU: Panduan Memulai Cepat (7 halaman)

Halaman Cetak
EKHO EK-WL8-EXP/AU Panduan Memulai Cepat
EK-WL8-EXP/AU
WIRELESS EXPANDER MODULE
STFV.425551.030-AU-UM rev. 17
20.04.2020
Page 3 of 7

INSTALLATION

The device can be hanged on two
screws using the top holes and then
secured with more screws through the
bottom holes. It is recommended to
install the device at least 2 meters
from the ground.
Ideally, the device should be installed
at a certain distance from metallic ob-
jects, doors, and power lines, as they
can cause the communication dis-
tance to drop. It is also important to
avoid installing the device near elec-
tronics and computer equipment in order to protect it from potential electromagnetic
interference.
To secure the cover, you should
insert two rivet snaps into the
holes.
To remove the cover, delete the two
rivet snaps by pulling on the base
brackets.