EKHO EK-WL8-EXP/AU 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} EKHO EK-WL8-EXP/AU에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EKHO EK-WL8-EXP/AU 7 페이지. Wireless expander module
EKHO EK-WL8-EXP/AU에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지)

페이지 인쇄
EKHO EK-WL8-EXP/AU 빠른 시작 매뉴얼
EK-WL8-EXP/AU
WIRELESS EXPANDER MODULE
STFV.425551.030-AU-UM rev. 17
20.04.2020
Page 3 of 7

INSTALLATION

The device can be hanged on two
screws using the top holes and then
secured with more screws through the
bottom holes. It is recommended to
install the device at least 2 meters
from the ground.
Ideally, the device should be installed
at a certain distance from metallic ob-
jects, doors, and power lines, as they
can cause the communication dis-
tance to drop. It is also important to
avoid installing the device near elec-
tronics and computer equipment in order to protect it from potential electromagnetic
interference.
To secure the cover, you should
insert two rivet snaps into the
holes.
To remove the cover, delete the two
rivet snaps by pulling on the base
brackets.