Ekinex EK-BG1-TP Manual

Jelajahi secara online atau unduh pdf Manual untuk Gerbang Ekinex EK-BG1-TP. Ekinex EK-BG1-TP 3 halaman. Knx - dali gateway

Halaman Cetak

KNX - Dali Gateway

Code: EK-BG1-TP

Description

The ekinex EK-BG1-TP gateway establishes the bidirec-

tional data connection between a DALI system and a KNX

bus system. The gateway allows you to control lighting

devices equipped with a standard DALI interface and

different light sources (such as fluorescent lamps, high

intensity discharge lamps and LEDs) by means of KNX

devices (such as buttons, motion and presence sensors

or touchpanels). The device has an integrated KNX bus

communication module and is designed for mounting on a

35 mm proﬁle DIN rail. The device is powered at 230 VAC

and supplies SELV power to the DALI bus.

DALI

DALI (Digital Addressable Lighting Interface) is an open

and interoperable worldwide standard dedicated to ligh-

ting applications and speciﬁed by the IEC (International

Electrotechnical Commission). The DALI protocol is inclu-

ded in the technical standard IEC 62386 Digital addressa-

ble lighting interface.

For further information: www.dali-ag.org.

Main features

• Plastic case

• Version for mounting on 35 mm proﬁle DIN rail (accor-

ding to EN 60715)

• Degree of protection IP20 (according to EN 60529)

• Security class II

• Weight 200 g

• 4 UM modular device (1 UM = 18 mm)

• Dimensions 72 x 95 x 60 mm (LxHxP)

Datasheet STEKBG1TP_EN

Technical data:

Connections:

• Power supply (230 V AC)

• KNX bus

• DALI bus

• Ethernet

DALI System:

• Transmission medium: unshielded cable

• Topology: linear, star or mixed

• Current consumption: max 250 mA

• DALI voltage: 9.5 V ... 22.5 V (typical 16 V)

• Max cable length: 300 m (section 1.5 mm²)

• Baud rate: 1200 bps

• Max number of DALI devices: 64

• Max number of DALI groups: 16

• Max number of DALI scenes: 16

Environmental conditions:

• Temperature range: -5 ... + 45°C

• Relative humidity: 95% non condensing

Operating, signaling and connecting elements

The appliance is equipped with:

• One terminal for the KNX bus line connection (1)

• Two terminals for the power supply connection (4)

• Two 2-pole terminals for the DALI bus connection(5)

• One RJ45 connector (6)

• One KNX programming button (2) with associated LED

(3)

• Three signaling LEDs (9, 10, 11)

• Two membrane keys (12)

Mounting

The device has degree of protection IP20 and is there-

fore suitable for use in dry indoor environments. The en-

closure is designed to be mounted on a DIN proﬁle rail

according to EN 60715 inside switchboards or electrical

distribution cabinets. The device must be mounted in a

vertical position; correct positioning is with the terminal for

the KNX bus is located at the bottom.

Note. When installing in switchboards and distribution cabinets,

the necessary ventilation must be ensured in order to maintain

the temperature within the operating range allowed for the ap-

pliance.