Dönges 222100 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Keselamatan Dönges 222100. Dönges 222100 11 halaman.

Basic information

TECHNICAL DATA

The Emergency Plug from Total Safety Solutions is suitable for all electric and plug-in hybrid

vehicles with a type 1 or type 2 connection. The vehicles for which the Emergency Plug is

suitable comply with the European legislation "VN/ECE regulation no. R100.01".

Only use the specified 3 x 1.5 volt alkaline manganese dioxide battery in the Emergency Plug as

supplied in the original factory version. Do not use rechargeable or lithium batteries. To prolong

the life of the battery, keep the Emergency Plug in a dry room at a temperature of +5°C to +30°C.

The Emergency Plug is always in standby mode and must be activated before use. Activation is

also for self-monitoring. The power consumption in standby mode is minimal. We recommend

testing the batteries monthly with the self-test button to prevent the batteries from running down

during use.

DURATION

The runtime depends on the amount of battery used, the ambient temperature and other

conditions. The runtime of the Emergency Plug is at least 2 hours at a temperature of +5°C to

+30°C for a battery with maximum capacity. The specified runtime refers to the battery

specifications at the time of initial delivery. The battery supplied and its 3 x 1.5 volt alkaline

manganese dioxide battery (Procell intense AA PX1500). A battery temperature that is too high

or too low can affect the battery life.

Total Safety Solutions recommends that the Emergency Plug be inspected and serviced annually

by one of Total Safety Solutions' approved suppliers. Any updates will also be installed during

this annual check.