ASTi Telestra Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman ASTi Telestra. ASTi Telestra 10 halaman. Remote control interface
Juga untuk ASTi Telestra: Panduan Pengguna (9 halaman)

Halaman Cetak

ASTi Telestra Remote Control Interface User Guide (Version 1, Revision C)

NAME

NAME FEDFILE <NewFedFileName>

NAME FEDERATION <NewFederationName>

NAME FEDERATION_NUMBER <NewFederationNumber>

NAME FEDERATE <NewFederateName>

This command controls the setting of four federate options. <NewFedFileName> is the name

of the .fed ﬁle the federation uses. <NewFederationName> is the name of the federation the

Telestra federate will join. <NewFederationNumber> is the number of the federation as it is

known to the DACS. If you are only running a single federation, this should be set to 1. <New-

FederateName> is the name of the Telestra federate. The NAME command alone will simply

return the values of these variables. The other forms will set the corresponding value, and

return the values for all the variables.

The changes do not take effect until the federate joins the federation. If the values of the name

variables are changed while the Telestra federate is joined, the changes will not take effect

until another JOIN command is issued.

STATUS

Returns either "JOINED <FederationName>" or "RESIGNED". The federation name

returned is the one currently joined, even if the NAME command has been issued to change

the FEDERATION variable.

OBJECT

OBJECT TRANSMITTER

OBJECT RECEIVER

OBJECT ENTITY

OBJECT LOCAL

When called with no arguments, the OBJECT command returns a list of objects that the

Telestra federate is aware of. The Telestra federate subscribes to Receiver, Transmitter, and

entity objects. The name, RTI handle, and type of the object is returned. In addition, an object

is designated as "local" if it is owned by the Telestra federate in question (for transmitters and

receivers), or if there is a local transmitter or receiver attached to it (in the case of entities).

A sample output looks like this:

Receiver

Viper3.UHF1.rx

Receiver

Viper3.UHF2.rx

Receiver

Viper3.VHF1.rx

Receiver

Viper3.VHF2.rx

Receiver local GeoCntr-6.Radio021.rx handle: 196630 0x30016

Receiver local GeoCntr-6.Radio022.rx handle: 196628 0x30014

Transmitter

Viper3.UHF1.tx

Transmitter

Viper3.UHF2.tx

Transmitter

Viper3.VHF1.tx

Transmitter

Viper3.VHF2.tx

Transmitter local GeoCntr-6.Radio021.tx handle: 196609 0x30001

Transmitter local GeoCntr-6.Radio022.tx handle: 196613 0x30005

ENDLIST

handle: 65538 0x10002

handle: 65542 0x10006

handle: 65540 0x10004

handle: 65546 0x10010

handle: 65537 0x10001

handle: 65541 0x10005

handle: 65539 0x10003

handle: 65545 0x10009