Astonica 40200806 Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Air Mancur Luar Ruangan Astonica 40200806. Astonica 40200806 3 halaman. Three tier fountain
Halaman Cetak
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
A
Base Pedestal
B
Large Basin
C
Center Pedestal
D
Medium Basin
E
Top Pedestal
F
Small Basin
G
Finial Top
H
Electric Pump
I
Light Ring
J
Transformer
Parts Detail
A
B
F
E
H
I
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
QUANTITY
C
D
G
J
2
NOTE: Tabs and notches on fountain parts are
1
different sizes and must be matched up
1
correctly to secure.
1
1. (SEE FIGURE 1) Place the base pedestal (A) on
1
flat, level surface. Put the large basin (B) on
1
the base pedestal (A) aligning the tabs of the
1
basin with the notches in the top of the base.
Turn the large basin counter clockwise to lock
1
into place. Place the electric pump (H) into the
1
center ring in the bottom of the large basin (B)
1
beside the PVC tube. Thread the power cord of
1
the pump (H) through the PVC tube, the
pedestal base (A) and out the bottom of the
base as shown. Connect the male end of the
power cord from pump (H) to the female
connector of the transformer (J).
2. (SEE FIGURE 2) Place the light ring (I) in the
bottom of the large basin (B). Remove the door
of the center pedestal (C) located at the base
of the pedestal. Thread the light connector
cords from the electric pump through the door
opening and out. Align the tabs and notches
and set the center pedestal (C) on the large
basin. Do not secure yet.
ASSEMBLY INSTRUCTIONS
Figure 1
Power Cord
Power Cord
Figure 2
Light Connectors
3
H
I
B
Basin Tab
Base Notch
A
J
C
Door
I
H
Basin Tab
B