Astor-Bannerman CTM3 Panduan Petunjuk Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perabotan Dalam Ruangan Astor-Bannerman CTM3. Astor-Bannerman CTM3 4 halaman. Manual changing table
Juga untuk Astor-Bannerman CTM3: Panduan Pemilik dan Panduan Instruksi (2 halaman)
Halaman CetakGap 40mm Min
Installation process.
1. Unpack the unit.
2. Determine the position of the unit on the wall ensuring that the lower mounting fixing points are
at least 438mm from the floor. The range of travel for the stretcher is 290mm. If the lower fixing points
are drilled at 438mm from floor level the stretcher will operate from 790mm to 1080mm.
3. Mark the hole positions for the upper blocks carefully ensuring that the two sets of marks are level. Fix
the unit to the wall.
4. Hinge the unit upwards or remove from the fittings, then mark hole position for the lower fixings.
5. Drill full-depth holes at all four marked positions to accept your Anchors.
6. For fixing to ply only. Drill full depth pilot holes at all 4 marked positions. (8MM Ø Coach screws are
usually used for plywood).
7. Fit the CTM2 frame onto the wall and secure.
Unit 11f, Coln Park, Andoversford, Gloucestershire, GL54 4HJ
Tel 01242-820820 Fax01242-821110, e mail: [email protected]
Distance = 1/2 Bed Length -295mm
Hole Centres = 797mm
Hole Centres = 595mm
1262mm Recommended
1162mm Minimum