Astor-Bannerman CTM3 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Indoor Furnishing Astor-Bannerman CTM3. Astor-Bannerman CTM3 4 pages. Manual changing table
Also for Astor-Bannerman CTM3: Owners Manual And Instruction Manual (2 pages)

Print Page

Gap 40mm Min

Installation process.

1. Unpack the unit.

2. Determine the position of the unit on the wall ensuring that the lower mounting fixing points are

at least 438mm from the floor. The range of travel for the stretcher is 290mm. If the lower fixing points

are drilled at 438mm from floor level the stretcher will operate from 790mm to 1080mm.

3. Mark the hole positions for the upper blocks carefully ensuring that the two sets of marks are level. Fix

the unit to the wall.

4. Hinge the unit upwards or remove from the fittings, then mark hole position for the lower fixings.

5. Drill full-depth holes at all four marked positions to accept your Anchors.

6. For fixing to ply only. Drill full depth pilot holes at all 4 marked positions. (8MM Ø Coach screws are

usually used for plywood).

7. Fit the CTM2 frame onto the wall and secure.

Unit 11f, Coln Park, Andoversford, Gloucestershire, GL54 4HJ

Tel 01242-820820 Fax01242-821110, e mail: [email protected]

Distance = 1/2 Bed Length -295mm

Hole Centres = 797mm

Hole Centres = 595mm

1262mm Recommended

1162mm Minimum