Door Knox VDP404 Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem interkom Door Knox VDP404. Door Knox VDP404 13 halaman. Wireless external door entry kit
Halaman Cetak
Doc XVDP400
Power button three or four times quickly and the monitor will enter encoding mode and
will display "Pairing".
2. Obtain a paperclip and straighten out one leg and push into the Encoding hole on the
back of the camera. Hold down until a "Ding" sound is heard with a blue flashing light.
When a "Dong" sound is heard from the monitor, it will display camera images and this
means the pairing process is now complete and it has paired one camera unit to one
monitor.
3.If you need to pair one camera unit with multiple monitor units (up to 3), after
completing step 2 above, press the paperclip into the Encoding hole on the back of the
camera unit two to three times quickly and when you hear a "Dong Dong" tone, it means
that one camera unit is now paired with two monitor units, and it if you hear a "Dong Dong
Dong" tone the camera in paired with three monitor units.
4. After finishing the pairing (encoding) of two or three monitor units, press the CALL
button on the camera unit and if all the monitors display images at the same time, it
means the pairing has completed successfully.
Email:
Last Revised: 13/07/2017