Door Knox VDP404 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem interkom Door Knox VDP404. Door Knox VDP404 13 halaman. Wireless external door entry kit
Halaman Cetak
Troubleshooting
Problem
There is no response when
the camera unit calls the
monitor after powering up.
Monitor feedback noise
No response after calling
Fails to unlock
All specifications are approximate. doorknox.com reserves the
right to change any product specifications or features without
notice. Whilst every effort is made to ensure that these
instructions are complete and accurate, doorknox.com cannot
be held responsible in any way for any losses, no matter how
they arise, from errors or omissions in these instructions, or the
performance or non-performance of the equipment that these
instructions refer to.
Email:
The camera and monitor have not been paired or have lost the pairing
code. Refer to section: VDP400 Door Entry Kit Operation Item 8
"Pairing the Monitor to the Camera."
If the monitor is installed too close to the camera, it may cause audio
feedback. The best answer is to increase distance between the two units
or place a screen between them.
Check that there is battery/power available.
Check that the camera and monitor are not beyond the limits of wifi
connection, over 50 metres line of site or too many obstructions
between camera and monitor.
Check that electric lock is connected correctly.
If the camera is powered by the lithium battery it will not activate an
electric lock.
Check that the electric lock is correctly connected.
WEE/CG0783SS
Doc XVDP400
Resolution
This symbol on the products and/or accompanying documents means
that used electronic equipment must not be mixed with general
household waste. For treatment, recovery and recycling please return
this unit to your trade supplier or local designated collection point as
defined by your local council.
Last Revised: 13/07/2017