DoorHan Sectional-DIY-500 Panduan Instalasi dan Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pembuka Gerbang DoorHan Sectional-DIY-500. DoorHan Sectional-DIY-500 20 halaman. Operator
Halaman Cetak
Press the "–",
Press "P"
the "7" will light
PAUSE TIME SETUP
S
P
Press the "–",
Press "P"
the "7" will light
ALARM ACTUATION AFTER 2 000 CYCLES
+
S
-
P
Press "P"
Press the "–", the
"8" will light
TO FINISH PROGRAMMING
Pressing the "+", select "1". Press and hold "P" for 5 seconds. The number "0" will appear on the display. Programming is
over.
Remote control programming
TO ADD A REMOTE CONTROL
1) Y ou should press and hold down the button "S", until the indicator (dot) at the bottom of the display lights up. Release
the button.
2) Select the button on the control panel, with the help of which you will control the operator's work, and double press it.
3) Repeat operations for other panels (maximum quantity — 16 pc.).
TO ERASE A REMOTE CONTROL
To delete panels from the receiver memory, press and hold down the button "S" for 8–10 seconds, until the indicator (dot)
at the bottom of the display goes out, and the short sound signal is heard.
10
Нажмая «+» и «–» выбирите значение
функции: «0» — выкл., «1» — вкл.
+
+
S
-
P
-
By pressing "+" and "–", select the function value: "0" — without automatic
closing, "1" – 30-second pause, "2" — 60-second pause, ..., "8" —
240-second pause. Afterwards press "P"
By pressing "+" and "–", select
the function value: "0" — off, "1" — on
Нажмите «P»
для сохранения
информации
+
S
P
-
Press "P" in order
to store
ELECTRICAL CONNECTIONS
S
P
+
-