DoorHan Sectional-DIY-500 Manuale d'installazione e d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Apriporta DoorHan Sectional-DIY-500. DoorHan Sectional-DIY-500 20. Operator

Press the "–",

Press "P"

the "7" will light

PAUSE TIME SETUP

Press the "–",

Press "P"

the "7" will light

ALARM ACTUATION AFTER 2 000 CYCLES

Press "P"

Press the "–", the

"8" will light

TO FINISH PROGRAMMING

Pressing the "+", select "1". Press and hold "P" for 5 seconds. The number "0" will appear on the display. Programming is

over.

Remote control programming

TO ADD A REMOTE CONTROL

1) Y ou should press and hold down the button "S", until the indicator (dot) at the bottom of the display lights up. Release

the button.

2) Select the button on the control panel, with the help of which you will control the operator's work, and double press it.

3) Repeat operations for other panels (maximum quantity — 16 pc.).

TO ERASE A REMOTE CONTROL

To delete panels from the receiver memory, press and hold down the button "S" for 8–10 seconds, until the indicator (dot)

at the bottom of the display goes out, and the short sound signal is heard.

Нажмая «+» и «–» выбирите значение

функции: «0» — выкл., «1» — вкл.

By pressing "+" and "–", select the function value: "0" — without automatic

closing, "1" – 30-second pause, "2" — 60-second pause, ..., "8" —

240-second pause. Afterwards press "P"

By pressing "+" and "–", select

the function value: "0" — off, "1" — on

Нажмите «P»

для сохранения

информации

Press "P" in order

to store

ELECTRICAL CONNECTIONS