Canon PIXMA MP620 series Panduan Servis - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Servis untuk Semua dalam Satu Printer Canon PIXMA MP620 series. Canon PIXMA MP620 series 46 halaman. Installing your multifunction on additional computers windows os
Juga untuk Canon PIXMA MP620 series: Pengaturan (4 halaman), Panduan Tambahan (6 halaman), Petunjuk Penyiapan (4 halaman), Manual (20 halaman), Spesifikasi (2 halaman), Manual (10 halaman), Manual (8 halaman), Panduan Pengaturan Jaringan (22 halaman), Panduan Instalasi (11 halaman), Manual Koneksi (19 halaman), Panduan Instalasi (7 halaman), Menginstal (21 halaman)

*1: General notes:

- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly. See

Notes on Repair Servicing

- Do not drop the ferrite core, which may cause damage.

- Protect electrical parts from damage due to static electricity.

- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor discharging

to protect the logic board ass'y from damages).

- Do not touch the timing slit strip film and timing slit disk feed film. No grease or abrasion is allowed.

- Protect the units from soiled with ink.

- Protect the housing from scratches.

- Exercise caution with the screws, as follows:

i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO NOT

loosen them in other cases).

ii. Before loosening the 3 screws that fix the carriage rail to the main chassis, mark the screw positions so that the

carriage rail will be re-attached to the main chassis in its original position.

or the Parts Catalog for details.

<3-1. Notes on Service Part Replacement>

15 / 44

3-2. Special