Canon PIXMA MP620 series 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Canon PIXMA MP620 series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP620 series 46 페이지. Installing your multifunction on additional computers windows os
Canon PIXMA MP620 series에 대해서도 마찬가지입니다: 설정 (4 페이지), 보충 설명서 (6 페이지), 설정 지침 (4 페이지), 매뉴얼 (20 페이지), 사양 (2 페이지), 매뉴얼 (10 페이지), 매뉴얼 (8 페이지), 네트워크 설정 매뉴얼 (22 페이지), 설치 매뉴얼 (11 페이지), 연결 매뉴얼 (19 페이지), 설치 매뉴얼 (7 페이지), 설치 (21 페이지)

페이지 인쇄

*1: General notes:

- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly. See

Notes on Repair Servicing

- Do not drop the ferrite core, which may cause damage.

- Protect electrical parts from damage due to static electricity.

- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor discharging

to protect the logic board ass'y from damages).

- Do not touch the timing slit strip film and timing slit disk feed film. No grease or abrasion is allowed.

- Protect the units from soiled with ink.

- Protect the housing from scratches.

- Exercise caution with the screws, as follows:

i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO NOT

loosen them in other cases).

ii. Before loosening the 3 screws that fix the carriage rail to the main chassis, mark the screw positions so that the

carriage rail will be re-attached to the main chassis in its original position.

or the Parts Catalog for details.

<3-1. Notes on Service Part Replacement>

15 / 44

3-2. Special