Canon PIXMA MP620 series 서비스 매뉴얼 - 페이지 46

{카테고리_이름} Canon PIXMA MP620 series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP620 series 46 페이지. Installing your multifunction on additional computers windows os
Canon PIXMA MP620 series에 대해서도 마찬가지입니다: 설정 (4 페이지), 보충 설명서 (6 페이지), 설정 지침 (4 페이지), 매뉴얼 (20 페이지), 사양 (2 페이지), 매뉴얼 (10 페이지), 매뉴얼 (8 페이지), 네트워크 설정 매뉴얼 (22 페이지), 설치 매뉴얼 (11 페이지), 연결 매뉴얼 (19 페이지), 설치 매뉴얼 (7 페이지), 설치 (21 페이지)

페이지 인쇄

MP620 / MP628

4. MACHINE TRANSPORTATION

This section describes the procedures for transporting the machine for returning after repair, etc.

1) In the service mode, press the ON button to finish the mode, and confirm that the paper lifting plate of the rear tray is raised.

2) Keep the print head and ink tanks installed in the carriage.

See Caution (1) below.

3) Turn off the machine to securely lock the carriage in the home position. (When the machine is turned off, the carriage is automatically

locked in place.)

See Caution (2) below.

(1) If the print head is removed from the machine and left alone by itself, ink (the pigment-based black ink in

particular) is likely to dry. For this reason, keep the print head installed in the machine even during

transportation.

(2) Securely lock the carriage in the home position, to prevent the carriage from moving and applying stress to the

carriage flexible cable, or causing ink leakage, during transportation.

- If the print head must be removed from the machine and transported alone, attach the protective cap (used when the packing

was opened) to the print head (to protect the print head face from damage due to shocks).

- If the packing material that fixed the carriage from the factory is still available, re-use it to fix the carriage (to prevent the

carriage unlocked during transportation).

<4. MACHINE TRANSPORTATION>

44 / 44

TABLE OF CONTENTS