Canon PIXMA MP990 Panduan Pengaturan Jaringan - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengaturan Jaringan untuk Semua dalam Satu Printer Canon PIXMA MP990. Canon PIXMA MP990 16 halaman. Installing your multifunction on additional computers
Juga untuk Canon PIXMA MP990: Manual Fungsi (12 halaman), Spesifikasi Teknis (2 halaman), Manual Jaringan (24 halaman), Manual Jaringan (19 halaman), Manual (10 halaman), Panduan Instalasi Jaringan (19 halaman), Panduan Instalasi (8 halaman)

Canon PIXMA MP990 Panduan Pengaturan Jaringan

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
0
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
Perform setup again by following the procedures in "Wireless Setup" on page 23 and onward or
"Wired Setup" on page 30 and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired LAN
Inactive
TCP/IP setting
Obtain an IP address automatically