Canon PIXMA MP990 Ağ Kurulum Kılavuzu - Sayfa 12

Hepsi Bir Arada Yazıcı Canon PIXMA MP990 için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Canon PIXMA MP990 16 sayfaları. Installing your multifunction on additional computers
Ayrıca Canon PIXMA MP990 için: İşlev Kılavuzu (12 sayfalar), Teknik Özellikler (2 sayfalar), Ağ Kılavuzu (24 sayfalar), Ağ Kılavuzu (19 sayfalar), Manuel (10 sayfalar), Ağ Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (8 sayfalar)

Canon PIXMA MP990 Ağ Kurulum Kılavuzu

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
0
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
Perform setup again by following the procedures in "Wireless Setup" on page 23 and onward or
"Wired Setup" on page 30 and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired LAN
Inactive
TCP/IP setting
Obtain an IP address automatically