Astrel Instruments AST-8300-A Memulai - Halaman 5

Jelajahi secara online atau unduh pdf Memulai untuk Kamera Digital Astrel Instruments AST-8300-A. Astrel Instruments AST-8300-A 20 halaman.
Juga untuk Astrel Instruments AST-8300-A: Panduan Manual Otomatis (14 halaman), Panduan Pengguna (6 halaman)

Halaman Cetak

Astrel Instruments

Powering up the camera

To correctly power up the camera, please follow this sequence:

• When needed, connect the touch LCD monitor paying attention to the polarization key.

• When needed, connect the Ethernet cable to the camera and to the PC.

• When needed, connect the wifi USB adapter using the USB port. The wifi adapter must

be connected to the camera before power up in order to start the wifi host access point

during the camera boot sequence.

• Cables other than USB, for example the mount motors cable or the serial cable, can be

connected and disconnected at any time, but it's always a good rule to connect any

needed device before power up.

• Connect the power supply cable.

After the power supply is connected, the camera boots the Linux operating system and then

starts the Desktop application, from where all the camera's applications can be accessed.

Getting Started

5/20

AST-8300-A

rev D