Astrel Instruments AST-8300-A 시작하기 - 페이지 5
{카테고리_이름} Astrel Instruments AST-8300-A에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST-8300-A 20 페이지.
Astrel Instruments AST-8300-A에 대해서도 마찬가지입니다: 자동 매뉴얼 (14 페이지), 사용자 설명서 (6 페이지)
페이지 인쇄Astrel Instruments
Powering up the camera
To correctly power up the camera, please follow this sequence:
• When needed, connect the touch LCD monitor paying attention to the polarization key.
• When needed, connect the Ethernet cable to the camera and to the PC.
• When needed, connect the wifi USB adapter using the USB port. The wifi adapter must
be connected to the camera before power up in order to start the wifi host access point
during the camera boot sequence.
• Cables other than USB, for example the mount motors cable or the serial cable, can be
connected and disconnected at any time, but it's always a good rule to connect any
needed device before power up.
• Connect the power supply cable.
After the power supply is connected, the camera boots the Linux operating system and then
starts the Desktop application, from where all the camera's applications can be accessed.
Getting Started
5/20
AST-8300-A
rev D