Dorani Limited DORVT Instal Manual - Halaman 6

Jelajahi secara online atau unduh pdf Instal Manual untuk Sistem interkom Dorani Limited DORVT. Dorani Limited DORVT 8 halaman. Touch video intercom system, 2 wire system
Juga untuk Dorani Limited DORVT: Panduan Pengguna (7 halaman), Instal Manual (14 halaman)

Halaman Cetak
Dorani Limited DORVT Instal Manual
KEYPAD DOOR STATIONS:
Type Master Code (Default) 1234 # - Keypad lights should be White
Type 14# - Keypad lights should be Yellow
Type 0# (Default)
Type 1#
Type 2#
Type 3#
A red keypad means the adress setting was incorrect.
Press * to exit.
AUDIO DOOR STATIONS:
This is programmed by Dip Switch Settings on the rear of the station.
Door 1 = NO Switches ON
Door 2 = Switch 1 ON
Door 3 = Switch 2 ON
Door 4 = Switch 1 + 2 ON
Lock Settings (to be done on monitor):
The system is designed with a Relay Contact through the PL & S+ Terminals on the door
station
A separate power supply is required if triggering a door gate release from these
contacts, if an electric motor is to be triggered no additional power supplies need to be
introduced.
These program changes affect ALL Door stations connected – the memory is held in the
door station, connect door stations and program individually if you require different
release times or release types for each door
Changing from Normally Open to Normally Close – Default = Normally Open
Enter the Installer Setup Page on the MASTER monitor
Normally Closed =
Normally Open =
Changing lock release time - Default = 1 Second
The time can be from 1 Second to 99 Seconds (8401 – 8499)
Enter the Installer Setup Page on the MASTER monitor
1 Second =
Program 8401 and press OK
99 Seconds = Program 8499 and press OK
= Door 1
Lights should go green then white
= Door 2
Lights should go green then white
= Door 3
Lights should go green then white
= Door 4
Lights should go green then white
Program 8011 and press OK
Program 8010 and press OK
6