Canon Microfilm Scanner 500 Buku Petunjuk - Halaman 26

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemindai Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 halaman.

OPERATING PROCEDURES

Setting the film mode

This section describes various print settings that you can use to

control the quality and format of the finished print. Make the ap-

propriate settings before you begin printing.

Use this mode for accurate printing of halftone graphic images.

You can toggle the mode on or off by pressing the Picture key on

the keyboard. The lamp to the left of the key comes on to indicate

that unit is in the Picture mode.

Automatic density adjustment does not function while

the unit is in the Picture mode.

Follow this procedure when you need to sharpen or soften the

image.

1. Press the SHARPNESS key on the keyboard, so that the lamp

next to this key begins to blink.

2. Press the right or left Print Density Adjustment keys to sharpen or

soften the image. You can set the sharpness to one of five levels.

The Print Density display moves to reflect your new setting.

3. Press the SHARPNESS key once again to register the new set-

ting.