Canon Microfilm Scanner 500 사용 설명서 - 페이지 26

{카테고리_이름} Canon Microfilm Scanner 500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Microfilm Scanner 500 48 페이지.

OPERATING PROCEDURES

Setting the film mode

This section describes various print settings that you can use to

control the quality and format of the finished print. Make the ap-

propriate settings before you begin printing.

Use this mode for accurate printing of halftone graphic images.

You can toggle the mode on or off by pressing the Picture key on

the keyboard. The lamp to the left of the key comes on to indicate

that unit is in the Picture mode.

Automatic density adjustment does not function while

the unit is in the Picture mode.

Follow this procedure when you need to sharpen or soften the

image.

1. Press the SHARPNESS key on the keyboard, so that the lamp

next to this key begins to blink.

2. Press the right or left Print Density Adjustment keys to sharpen or

soften the image. You can set the sharpness to one of five levels.

The Print Density display moves to reflect your new setting.

3. Press the SHARPNESS key once again to register the new set-

ting.