Astrol Electronic BAT-FLEX Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Alat Ukur Astrol Electronic BAT-FLEX. Astrol Electronic BAT-FLEX 19 halaman.

4. Set up the Measurement Program

Each measurement consists of 3 different files. All files are readable with a text editor.

Type

Measurement Program File (*.mpr)

Data File(*.dat)

Log File (*.log)

The files should not be separated from each other during a measurement. Otherwise the CCCC Software will not recognize preexisting

data and is going to create a new Data File in the folder of the Measurement Program File.

This window shows the configuration page of a

cyclovoltametric step

Astrol Electronic AG reserves the right to change specifications without notice

Bat FLEX Manual

Function

This file contains the general structure of the measurement. It can

be created with the Editor Tool (CCCC Tool). If one wants to

implement a custom software or script to create measurement

flows,one should refer to the step syntax documentation.

The Data File is created by the CCCC Software during a

measurement. It contains the measurement data recorded by the

device.

This File contains all the events that took place during the

measurement. For example if the measurement was canceled or if

a counter was set to a specific value during the data recording.

However if one likes to share the data after a recording, it is sufficient to pass

just the Data File because it contains all the essential information to visualize

the results.

10/19

AD-10069-007 Rev. 03