Astrol Electronic BAT-FLEX Manual - Page 10

Browse online or download pdf Manual for Measuring Instruments Astrol Electronic BAT-FLEX. Astrol Electronic BAT-FLEX 19 pages.

Astrol Electronic BAT-FLEX Manual

4. Set up the Measurement Program

4.1. Introduction

Each measurement consists of 3 different files. All files are readable with a text editor.
Type
Measurement Program File (*.mpr)
Data File(*.dat)
Log File (*.log)
The files should not be separated from each other during a measurement. Otherwise the CCCC Software will not recognize preexisting
data and is going to create a new Data File in the folder of the Measurement Program File.
This window shows the configuration page of a
cyclovoltametric step
Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
Function
This file contains the general structure of the measurement. It can
be created with the Editor Tool (CCCC Tool). If one wants to
implement a custom software or script to create measurement
flows,one should refer to the step syntax documentation.
The Data File is created by the CCCC Software during a
measurement. It contains the measurement data recorded by the
device.
This File contains all the events that took place during the
measurement. For example if the measurement was canceled or if
a counter was set to a specific value during the data recording.
However if one likes to share the data after a recording, it is sufficient to pass
just the Data File because it contains all the essential information to visualize
the results.
10/19
AD-10069-007 Rev. 03