Canon 2096B001 - SELPHY ES2 Photo Printer Panduan Pemula - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemula untuk Perangkat lunak Canon 2096B001 - SELPHY ES2 Photo Printer. Canon 2096B001 - SELPHY ES2 Photo Printer 33 halaman. Compact photo printer

Error Messages

The power button of the printer blinks or lights red and a message is displayed on the LCD monitor
if any error occurs during printing. If a problem occurs while the printer is connected to the camera,
the camera's LCD monitor may display an error message.

Power Button

Blinks red
An error (e.g. paper jam) preventing printing from restarting has occurred. Turn the
printer off then back on again, and try printing again.
There is a problem with the battery and it cannot be charged. Replace with a
different battery, or use a compact power adapter for the printer (ES2 only).
Blinks orange
Battery pack depleted. Change it with a fully charged battery pack or recharge the
current battery pack. You can also use the printer's compact power adapter.
Temperature is not within the operating temperature range for charging (ES2 only).
Charge within 5 - 40 °C (41 – 104 °F).
Lights red
Check the error message on the LCD monitor.

LCD Monitor

No paper/ink
Check that the cartridge is correctly installed.
Make sure that the cartridge contains paper/ink.
If paper is not feeding correctly, remove the cartridge, and manually remove any
paper remaining in the printer.

Paper jam

Press the
and turn it on again. If the printer fails to eject the paper, contact a Canon Customer
Support center for assistance.
0
to eject the paper. If the paper is not ejected, turn the power off