Canon 2096B001 - SELPHY ES2 Photo Printer Manuale per principianti - Pagina 20

Sfoglia online o scarica il pdf Manuale per principianti per Software Canon 2096B001 - SELPHY ES2 Photo Printer. Canon 2096B001 - SELPHY ES2 Photo Printer 33. Compact photo printer

Stampa la pagina

Error Messages

The power button of the printer blinks or lights red and a message is displayed on the LCD monitor
if any error occurs during printing. If a problem occurs while the printer is connected to the camera,
the camera's LCD monitor may display an error message.

Power Button

Blinks red
•
An error (e.g. paper jam) preventing printing from restarting has occurred. Turn the
printer off then back on again, and try printing again.
There is a problem with the battery and it cannot be charged. Replace with a
•
different battery, or use a compact power adapter for the printer (ES2 only).
Blinks orange
Battery pack depleted. Change it with a fully charged battery pack or recharge the
•
current battery pack. You can also use the printer's compact power adapter.
•
Temperature is not within the operating temperature range for charging (ES2 only).
Charge within 5 - 40 °C (41 – 104 °F).
Lights red
•
Check the error message on the LCD monitor.

LCD Monitor

No paper/ink
•
Check that the cartridge is correctly installed.
•
Make sure that the cartridge contains paper/ink.
•
If paper is not feeding correctly, remove the cartridge, and manually remove any
paper remaining in the printer.

Paper jam

Press the
•
and turn it on again. If the printer fails to eject the paper, contact a Canon Customer
Support center for assistance.
0
to eject the paper. If the paper is not ejected, turn the power off