Doremi DCP-2K4 Prosedur Penggantian - Halaman 8

Jelajahi secara online atau unduh pdf Prosedur Penggantian untuk Server Doremi DCP-2K4. Doremi DCP-2K4 11 halaman. Digital cinema servers ssd flash replacement procedure for supermicro x7sbe motherboard fitted units

Halaman Cetak
Doremi DCP-2K4 Prosedur Penggantian

3.4 New SSD Flash Installation

Take the new SSD flash provided by Doremi and note the pin hole that is blocked – it will
have to match the missing pin of the holding card's connector as presented below:
Pin hole
blocked
(a)
Figure 8: SSD Flash Pin Hole Blocked – Card's Connector Missing Pin
Plug the SSD flash into the card's dedicated connector by respecting the matching
between the blocked pin hole and the connector missing pin. Then put back the screw
holding the SSD flash to the card's stand-off as presented below:
SSD being
attached to the
card's stand-off
Figure 9: SSD Flash Pin Hole Blocked – Card's Connector Missing Pin
D2K.DP.000804.DRM
Missing
pin
Page 8
Doremi Cinema LLC Confidential
stand-off
(b)
Version 1.0