Doremi DCP-2K4 교체 절차 - 페이지 8
{카테고리_이름} Doremi DCP-2K4에 대한 교체 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Doremi DCP-2K4 11 페이지. Digital cinema servers ssd flash replacement procedure for supermicro x7sbe motherboard fitted units
페이지 인쇄
3.4 New SSD Flash Installation
Take the new SSD flash provided by Doremi and note the pin hole that is blocked – it will
have to match the missing pin of the holding card's connector as presented below:
Pin hole
blocked
(a)
Figure 8: SSD Flash Pin Hole Blocked – Card's Connector Missing Pin
Plug the SSD flash into the card's dedicated connector by respecting the matching
between the blocked pin hole and the connector missing pin. Then put back the screw
holding the SSD flash to the card's stand-off as presented below:
SSD being
attached to the
card's stand-off
Figure 9: SSD Flash Pin Hole Blocked – Card's Connector Missing Pin
D2K.DP.000804.DRM
Missing
pin
Page 8
Doremi Cinema LLC Confidential
stand-off
(b)
Version 1.0