Asus A55BM-K Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Motherboard Asus A55BM-K. Asus A55BM-K 49 halaman.

Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~4)

These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard

disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can

create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.

A55BM-K

A55BM-K SATA 3.0Gb/s connectors

•

These connectors are set to AHCI mode by default. If you intend to create a Serial ATA

RAID set using these connectors, set the type of the SATA connectors in the BIOS to

[RAID].

•

You must install Windows

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

•

When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to

[AHCI].

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.

A55BM-K

A55BM-K Digital audio connector

The S/PDIF module is purchased separately.

ASUS A55BM-K

SATA3G_1

SATA3G_2

XP Service Pack 3 or later version before using Serial

XP SP3 or later version.

SPDIF_OUT

SATA3G_4

GND

RSATA_RXP4

RSATA_RXN4

SATA3G_3

GND

RSATA_TXN4

RSATA_TXP4

GND

1-17