Asus A55BM-K User Manual - Page 25
Browse online or download pdf User Manual for Motherboard Asus A55BM-K. Asus A55BM-K 49 pages.
Print Page
3.
Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~4)
These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard
disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can
create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.
A55BM-K
A55BM-K SATA 3.0Gb/s connectors
•
These connectors are set to AHCI mode by default. If you intend to create a Serial ATA
RAID set using these connectors, set the type of the SATA connectors in the BIOS to
[RAID].
•
You must install Windows
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
•
When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI].
4.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
A55BM-K
A55BM-K Digital audio connector
The S/PDIF module is purchased separately.
ASUS A55BM-K
SATA3G_1
SATA3G_2
XP Service Pack 3 or later version before using Serial
®
XP SP3 or later version.
®
SPDIF_OUT
SATA3G_4
GND
RSATA_RXP4
RSATA_RXN4
SATA3G_3
GND
RSATA_TXN4
RSATA_TXP4
GND
1-17