Asus AAEON PICO-APL3-SEMI Panduan Instalasi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Motherboard Asus AAEON PICO-APL3-SEMI. Asus AAEON PICO-APL3-SEMI 3 halaman.

Install Guide Steps

PICO-KBU4-SEMI Quick Installation Guide

Step 1: On the heatsink, remove the three plastic coverings as shown.

Step 2: Place the top chassis onto the heatsink. Note the orientation of the chassis with the heatsink. Secure with

four black screws.

Step 3: On the PICO-APL3 board, remove the nut and washer from the power input port.

Step 4: Insert the PICO-APL3 board into the

chassis assembly with the processor side toward

the heatsink. DO NOT place the CMOS battery

between the board and heatsink.

Step 6: Thread the power button cable through the hole for the power button. Plug the cable into the front panel

header (CN53 in user manual). NOTE: The white dot indicates PIN 1 connector, make sure the connector is

properly aligned. Next, gently push the power button in until it is secure (you will hear a 'snap'). Be careful not to

tangle the power button cable with the CMOS battery cable.

Step 5: Check that the I/O ports are properly

aligned. Secure board with four nickel screws.