CANTERBURY OFFICINA NICOLAZZI Z2108 Manual - Halaman 7
Jelajahi secara online atau unduh pdf Manual untuk Produk Pipa CANTERBURY OFFICINA NICOLAZZI Z2108. CANTERBURY OFFICINA NICOLAZZI Z2108 13 halaman. Adore basin set with automatic pop-up waste
Halaman CetakInstallation Instructions
❾
Check the position on the sink of the tap,
then tighten the nut using a 13mm spanner
or smooth jawed shifter.
Note: the under deck mounting surface must
be flat. If the mounting surface is irregular, the
nut may not be secured, and the tap will be
loose on the sink.
❿
Connect water supply hoses 19 and 20,
from the tap body in the centre, to the
protruding stems on side body units.
Ensure all connections are firmly tightened,
and do not cross the supply hoses over
each other!
⓫
Connect main Hot and Cold water supplies
to the side body thread sections, using the
correct flexi tail hoses.
From the back view, the Cold water supply
is connected on the left hand side, with the
Hot water supply on the right hand side
Ensure all connections are firmly tightened.
Further information Phone (03) 9761 4603
7
Model : Z2108