CANTERBURY OFFICINA NICOLAZZI Z2108 매뉴얼 - 페이지 7

{카테고리_이름} CANTERBURY OFFICINA NICOLAZZI Z2108에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CANTERBURY OFFICINA NICOLAZZI Z2108 13 페이지. Adore basin set with automatic pop-up waste

페이지 인쇄

Installation Instructions

❾

 Check the position on the sink of the tap,

then tighten the nut using a 13mm spanner

or smooth jawed shifter.

Note: the under deck mounting surface must

be flat. If the mounting surface is irregular, the

nut may not be secured, and the tap will be

loose on the sink.

❿



Connect water supply hoses 19 and 20,

from the tap body in the centre, to the

protruding stems on side body units.



Ensure all connections are firmly tightened,

and do not cross the supply hoses over

each other!

⓫



Connect main Hot and Cold water supplies

to the side body thread sections, using the

correct flexi tail hoses.



From the back view, the Cold water supply

is connected on the left hand side, with the

Hot water supply on the right hand side



Ensure all connections are firmly tightened.

Further information Phone (03) 9761 4603

Model : Z2108

[email protected]