Asus XG-DLS Panduan Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Motherboard Asus XG-DLS. Asus XG-DLS 4 halaman. Xeon installation procedure central processing unit (cpu)

Halaman Cetak

Step 6: Install Retention Mechanism Cap

The retention mechanism has a cap to keep the processor down while preventing the

retention mechanism's walls from spreading.

The cap must go in from the left side first

(toward the ATX connectors). The left side

has one dot, while the right side has two dots.

Step 7: Install Retention Mechanism Frame

In order to keep the retention mechanism lock bar from coming free and to add extra

stability to the plastic retention mechanisms, a metal frame is used accross both reten-

tion mechanisms. After installing the frame, four captive nuts should be tightened on

the feet of the frame to the screws protruding from the retention mechanisms. This is

the end of the Xeon™ processor installation and you should have 4 extra (only 11 is

used out of 15) captive nuts in case you loose any.

(Item 9) Retention Mechanism Support Frame

Retention mechansim fram around single

processor configuration with terminator.

Removing the Xeon™ Processor

If you want to remove the processor, first remove the retention mechanism frame,

then remove the cap. The processor is pulled out of the slot 2 connector by flipping

both lifters at the same time so that the processor raises out of the connector. When

both lifters are vertical, pull out the processor by holding the lifters.

Xeon Installation Procedure

(Item 8) Retention

Mechanism Lock Bar

The right end of the cap enters the retention

mechanism and a click is heard as it snaps in

place.

ASUS Xeon Installation Guide

Retention mechansim fram around

dual processor configuration.

The processor raised out of the slot

2 connector by the reverse force of

the lifters as they are pryed to a

vertical position.