Asus XG-DLS Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Płyta główna Asus XG-DLS. Asus XG-DLS 4 stron. Xeon installation procedure central processing unit (cpu)
Drukuj stronę
Step 6: Install Retention Mechanism Cap
The retention mechanism has a cap to keep the processor down while preventing the
retention mechanism's walls from spreading.
The cap must go in from the left side first
(toward the ATX connectors). The left side
has one dot, while the right side has two dots.
Step 7: Install Retention Mechanism Frame
In order to keep the retention mechanism lock bar from coming free and to add extra
stability to the plastic retention mechanisms, a metal frame is used accross both reten-
tion mechanisms. After installing the frame, four captive nuts should be tightened on
the feet of the frame to the screws protruding from the retention mechanisms. This is
the end of the Xeon™ processor installation and you should have 4 extra (only 11 is
used out of 15) captive nuts in case you loose any.
(Item 9) Retention Mechanism Support Frame
Retention mechansim fram around single
processor configuration with terminator.
Removing the Xeon™ Processor
If you want to remove the processor, first remove the retention mechanism frame,
then remove the cap. The processor is pulled out of the slot 2 connector by flipping
both lifters at the same time so that the processor raises out of the connector. When
both lifters are vertical, pull out the processor by holding the lifters.
4
Xeon Installation Procedure
R
(Item 8) Retention
Mechanism Lock Bar
The right end of the cap enters the retention
mechanism and a click is heard as it snaps in
place.
ASUS Xeon Installation Guide
Retention mechansim fram around
dual processor configuration.
The processor raised out of the slot
2 connector by the reverse force of
the lifters as they are pryed to a
vertical position.