DAEWOO ELECTRONICS RN-325PW Panduan Servis - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kulkas DAEWOO ELECTRONICS RN-325PW. DAEWOO ELECTRONICS RN-325PW 8 halaman.

Halaman Cetak
No
Problem
The refrigerator does
1
not get cold at all.
The refrigerator does
2
not get cold enough.
The food in the
3
refrigerator is frozen
Two sides of the
4
cabinet are hot:
condensation occurs.
5
Vibrations
The refrigerator is
6
noisy.
The door can not
7
close properly.
The lamp does not
8
work.
Operating for all long
9
time.
Trouble shooting guide
Possible Cause
Not plugged in.
Is the circuit breaker tripped or blown fuse?
Is the refrigerator temperature control setted at
"off"?
Is the refrigerator control dialed set to correct
location?
Is the refrigerator placed in direct sunlight or
closely a heat source?
Is the door closed completely?
Is the door opened too frequently or too long? Open the door less often,
Does the door gasket seal properly?
Is the refrigerator overloaded?
Is the refrigerator control dialed set to correct
location?
Is the ambient temperature too low?
Hot-pipe is installed in two sides of
refrigerator.That makes refrigerator's
temperture lowquckly and save the power
Condensation can occur when you leave the
door open for a long time.
The refrigerator is not level and firm.
Water bubbling comes from the refrigerant
circulating of the refrigerator.
Contraction and expansion of the insulation
inside the walls may cause popping and
cracking.
Is the refrigerator unstable or touching the
wall?
Is the refrigerator not level?
Were the doors not properly installed?
Is the door gasket dirty and distortion?
Has the home circuit breaker or fuse tripped?
Is the refrigerator's door close completely?
Is the ambient temperature too high?
Is the temperature controller in freezer
chamber or in refrigerator chamber is set at
"strong" position
Too much food is loaded into the refrigerator
and insufficient spaces for airflow.
What To Do
Plug in
Put on the home circuit breaker or change
the new fuse.
Set the temperature control knob at "4".
Set it to a colder temperature.
Move the refrigerator to proper location.
Close the door completely.
Make the gasket sealing properly.
Load less food into it.
Set it to a warmer temperature.
Normal state.
Normal state.
Place the refrigerator in a level location.
Normal state.
Normal state.
Keep the refrigerator leaving the wall.
Adjust the refrigerator leveling.
Assure the doors installed propertly.
Cleaning and flatting the door gasket.
Put on the home circuit breaker or change
the new fuse.
Assure the door close completely.
Sets it at a right position.
Load less food into the refrigerator.