DAEWOO ELECTRONICS RN-325PW Servis Kılavuzu - Sayfa 5

Buzdolabı DAEWOO ELECTRONICS RN-325PW için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. DAEWOO ELECTRONICS RN-325PW 8 sayfaları.

Sayfayı Yazdır

Problem

The refrigerator does

not get cold at all.

The refrigerator does

not get cold enough.

The food in the

refrigerator is frozen

Two sides of the

cabinet are hot:

condensation occurs.

Vibrations

The refrigerator is

noisy.

The door can not

close properly.

The lamp does not

work.

Operating for all long

time.

Trouble shooting guide

Possible Cause

Not plugged in.

Is the circuit breaker tripped or blown fuse?

Is the refrigerator temperature control setted at

"off"?

Is the refrigerator control dialed set to correct

location?

Is the refrigerator placed in direct sunlight or

closely a heat source?

Is the door closed completely?

Is the door opened too frequently or too long? Open the door less often,

Does the door gasket seal properly?

Is the refrigerator overloaded?

Is the refrigerator control dialed set to correct

location?

Is the ambient temperature too low?

Hot-pipe is installed in two sides of

refrigerator.That makes refrigerator's

temperture lowquckly and save the power

Condensation can occur when you leave the

door open for a long time.

The refrigerator is not level and firm.

Water bubbling comes from the refrigerant

circulating of the refrigerator.

Contraction and expansion of the insulation

inside the walls may cause popping and

cracking.

Is the refrigerator unstable or touching the

wall?

Is the refrigerator not level?

Were the doors not properly installed?

Is the door gasket dirty and distortion?

Has the home circuit breaker or fuse tripped?

Is the refrigerator's door close completely?

Is the ambient temperature too high?

Is the temperature controller in freezer

chamber or in refrigerator chamber is set at

"strong" position

Too much food is loaded into the refrigerator

and insufficient spaces for airflow.

What To Do

Plug in

Put on the home circuit breaker or change

the new fuse.

Set the temperature control knob at "4".

Set it to a colder temperature.

Move the refrigerator to proper location.

Close the door completely.

Make the gasket sealing properly.

Load less food into it.

Set it to a warmer temperature.

Normal state.

Place the refrigerator in a level location.

Normal state.

Keep the refrigerator leaving the wall.

Adjust the refrigerator leveling.

Assure the doors installed propertly.

Cleaning and flatting the door gasket.

Put on the home circuit breaker or change

the new fuse.

Assure the door close completely.

Sets it at a right position.

Load less food into the refrigerator.