Dafra DNPB328 Panduan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Dafra DNPB328. Dafra DNPB328 10 halaman. Rivnut tool
Juga untuk Dafra DNPB328: Panduan Pengoperasian (10 halaman)
Halaman CetakDNPB328 Operation Manual
STROKE SETTING
1) Tool stroke should be set according to the work piece where the rivnut is to be set. This
tool's stroke can be adjusted between 1mm and 7mm.
2) To set the stroke:
a) Push the sleeve (#56) to the tool mandrel side, as shown:
b) Adjust the tool stroke by turning the knurled wheel on the tool as shown:
The scales along with the stroke setting window are indications for stroke.
c) Replace the sleeve (#56) back to its initial position after setting the stroke.
All manuals and user guides at all-guides.com