Dafra DNPB328 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dafra DNPB328에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DNPB328 10 페이지. Rivnut tool
Dafra DNPB328에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)

DNPB328 Operation Manual

STROKE SETTING

1) Tool stroke should be set according to the work piece where the rivnut is to be set. This

tool's stroke can be adjusted between 1mm and 7mm.

2) To set the stroke:

a) Push the sleeve (#56) to the tool mandrel side, as shown:

b) Adjust the tool stroke by turning the knurled wheel on the tool as shown:

The scales along with the stroke setting window are indications for stroke.

c) Replace the sleeve (#56) back to its initial position after setting the stroke.

All manuals and user guides at all-guides.com