Dafra DNPB328 운영 매뉴얼

{카테고리_이름} Dafra DNPB328에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DNPB328 10 페이지. Rivnut tool
Dafra DNPB328에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)

DNPB328 Operation Manual

PLEASE SPEND 5 MINUTES READING

THESE INSTRUCTIONS BEFORE USING

YOUR NEW RIVNUT TOOL.

TRUST US, IT WILL SAVE YOU TIME AND

INCONVENIENCE IN THE LONG RUN.

READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL!

It is

against injuries.

This tool should be used ONLY to set blind rivets within the TOOL'S CAPACITY. It MUST

NOT be used for other purposes, such as hammer, etc.

This tool should be always operated with compressed air supply within the air pressure

range 0.5Mpa ~ 0.7Mpa.

Always DISCONNECT the air supply from the tool before changing the tool parts, such as

mandrel, etc.

DO NOT use the tool in the environment described as below:

 fuel and combustion air.

 temperature rapidly rising.

 humidity, rain, water, storm and thunder, lightning.

When the tool is suspended by the operation hook during use, be sure the tool will not fall.

When using the tool, always carry protective goggles, protective gloves, safety helmet, and

other necessary protections. It is highly recommended for safety reasons.

Only use genuine spare parts for maintenance and repairs.

All repair work must be carried out by skilled personnel, when in doubt, always return the

tool to the distributor.

All manuals and user guides at all-guides.com

IMPORTANT

to follow the safety instructions for adequate protection