Dahua F Series Panduan Memulai Cepat - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Dahua F Series. Dahua F Series 18 halaman. Hd ir bullet network camera
Juga untuk Dahua F Series: Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (15 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (15 halaman)

Dahua HD Pinhole Network Camera Quick Start Guide

Installation Mode 2:

Figure 2-4 Installation mode 2 for square front end

Refer to the following installation steps:

1. Dig the holes for installation expansion bolts on the installation surface.

2. Take out the expansion bolts from the accessories bag and nail them into the holes you just

dug.

3. Open the accessories bag and take out the screws; tighten the three screws and fix the

device on the installation surface where the bolts are located.

4. Take out the decoration enclosure from the accessories bag, aim the device and press it hard

to install.

2.2 Installation of HD All-in-one Pinhole Network Camera

Note

The pinhole camera mainly adopts ceiling installation. The installation surface has to be thick

enough to sustain at least 3X weight of the camera.

Install the camera:

Use screws to fix the camera on the installation wall, as it is shown in Figure 2-1.

Figure 2-5 Installation of device