Dahua F Series Panduan Memulai Cepat - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Dahua F Series. Dahua F Series 18 halaman. Hd ir bullet network camera
Juga untuk Dahua F Series: Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (15 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (15 halaman)

Dahua F Series Panduan Memulai Cepat
Dahua HD Pinhole Network Camera Quick Start Guide

3 Network Configuration

The IP address of all the cameras is the same when leaving factory (default IP 192.168.1.108).
To make the camera access to the network smoothly, please plan the available IP segment
reasonably according to the actual network environment.

3.1 Modify IP Address

The cameras which are accessed via wired network can acquire and modify the IP address
through "Quick Configuration Tool". For the wireless network cameras, you need to connect to
the wired network to configure wireless parameters before use.
This section introduces the approach of modifying IP address via "Quick Configuration Tool". You
can also modify the IP address in the network parameters of the WEB interface. Please refer to
the document WEB Operation Manual in the disk for more details.
Note
The camera can be configured only when the IP addresses of the camera and the computer are
in the same network segment.
To modify IP address, do the following:
1. Double-click the "ConfigTools.exe" and open the "Quick Configuration Tool".
2. Double-click the device that needs to be configured.
The system will pop out the Login dialog box. See Figure 3-1 for more details.
3. Enter the IP address, username, password and port number of the camera, and then click
OK.
Note
The default username and password is admin and admin respectively, and the default port
is 37777.
Figure 3-1 Login
11