Dahua F Series Panduan Memulai Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Dahua F Series. Dahua F Series 15 halaman. Hd ir bullet network camera
Juga untuk Dahua F Series: Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (15 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (18 halaman)

Dahua HD IR Bullet Network Camera Quick Start Guide

Please refer to the following figure for alarm output information. See Figure 1-5 and

Figure 1-6.

Mode A:

Level application. Alarm output high and low level, alarm output is OC; it needs to

increase pull-up resistance externally to work normally. Max external pull-up level is 12V,

max port current is 300mA (peak). After external pull-up resistance is increased, the

default output signal is high level (external pull-up voltage), and it switches to low level

when there is alarm output.

Mode B:

Switch application. Alarm output is used to drive external circuit, max voltage is 12V and

max current is 300mA (peak), it is recommended to add a relay if it is beyond the value.

Figure 1-5

Figure 1-6