Electric Eel eCAM ACE 2 SL Panduan Operator - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Operator untuk Instrumen Analitik Electric Eel eCAM ACE 2 SL. Electric Eel eCAM ACE 2 SL 20 halaman. Video inspection system
Halaman CetakMAINTENANCE
Inspection Camera - After every use, the camera should be cleaned and
checked for possible damage. External scuffing of the camera case is nor-
mal and should be of no concern. The camera view port is made of sapphire
and should be cleaned with a soft, damp cloth. Grease, dirt or scratches will
affect the quality of the video and if the lens is badly scratched it should be
replaced.
LED Light Replacement - The camera heads use LED lighting and cannot
be replaced by the operator. These lights use very little power and unless
physically damaged or extreme voltage is applied to them, should last in-
definitely. If replacement is necessary, the camera should be returned to the
factory.
Reel and Cable Assembly Maintenance - The reel and cable assembly
should be kept clean from dirt, slime, grit, etc. When winding the cable
back onto the reel after an inspection, it is good practice to use a cloth to
wipe off any debris.
WARNING
NEVER USE A POWER WASHER TO CLEAN YOUR
INSPECTION EQUIPMENT. PRESSURIZED WA-
TER MAY GET INTO UNSEALED AREAS SUCH AS
THE USB BLOCK, KEYBOARD, REEL HUB AS-
SEMBLY AND SLIP RING HOUSING CAUSING
DAMAGE.
WATER DAMAGE TO ELECTRONIC EQUIPMENT
IS NOT COVERED BY YOUR WARRANTY.
16