Electric Eel eCAM ACE 2 SL 운영자 매뉴얼 - 페이지 16

{카테고리_이름} Electric Eel eCAM ACE 2 SL에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electric Eel eCAM ACE 2 SL 20 페이지. Video inspection system

MAINTENANCE

Inspection Camera - After every use, the camera should be cleaned and

checked for possible damage. External scuffing of the camera case is nor-

mal and should be of no concern. The camera view port is made of sapphire

and should be cleaned with a soft, damp cloth. Grease, dirt or scratches will

affect the quality of the video and if the lens is badly scratched it should be

replaced.

LED Light Replacement - The camera heads use LED lighting and cannot

be replaced by the operator. These lights use very little power and unless

physically damaged or extreme voltage is applied to them, should last in-

definitely. If replacement is necessary, the camera should be returned to the

factory.

Reel and Cable Assembly Maintenance - The reel and cable assembly

should be kept clean from dirt, slime, grit, etc. When winding the cable

back onto the reel after an inspection, it is good practice to use a cloth to

wipe off any debris.

WARNING

NEVER USE A POWER WASHER TO CLEAN YOUR

INSPECTION EQUIPMENT. PRESSURIZED WA-

TER MAY GET INTO UNSEALED AREAS SUCH AS

THE USB BLOCK, KEYBOARD, REEL HUB AS-

SEMBLY AND SLIP RING HOUSING CAUSING

DAMAGE.

WATER DAMAGE TO ELECTRONIC EQUIPMENT

IS NOT COVERED BY YOUR WARRANTY.