Baumer EAM MT Series Manual - Halaman 21

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Baumer EAM MT Series. Baumer EAM MT Series 28 halaman. Absolute encoder with canopen

Halaman Cetak

11 LSS slave

11.1 General

The baudrate and node ID can be configured by LSS (according to CiA 305). Another possibility to change the baudrate

and node ID is to access to the objects 2100h and 2101h (see object directory).

The LSS service is only available in NMT Stopped Mode.

11.2 Supported commands



Switch state global



Switch state selective



Configure node ID protocol



Configure bit timing parameters



Store configuration



Inquire identity vendor-ID



Inquire identity product code



Inquire identity revision number



Inquire identity serial number



Inquire identity node ID

11.3 LSS address

The needed values for LSS addressing as vendor ID, revision number, product code and serial number are printed on a

label on the encoder housing.

Baumer_EAM580_360_CANopen_MA_EN_Rev0003.0000h_Index0004.docx

06.08.2018

21/28

Baumer Electric AG

Frauenfeld, Switzerland