Baumer X 700 Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Baumer X 700. Baumer X 700 41 halaman. Absolute encoder profibus-dpv0 (with bus cover and ssi coupler)
Juga untuk Baumer X 700: Manual (26 halaman)
Halaman Cetak
Disclaimer of liability
The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.
Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.
At any time we should be pleased receiving your comments and proposals for further improvement of the
present document.
1. Introduction
1.1. Scope of delivery
Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number delivery is including:
• Encoder
• CD with describing file and manual (also available as download in the Internet)
1.2. Product assignment
Shaft encoder
Product
Product Code
GXP5W
0x28
X 700
0x28
GXP5W with the Product Code 0x28 is an absolute encoder with a CANopen interface and an implemented
application profile DSP417 (Application Profile for Lift Control Systems).
LIFT
Manual_GXP5_417_Lift_EN.doc
04.05.11
Device Name
Eds File
GXP5
GXP5_417.eds
GXP5
GXP5_417.eds
3/41
Product Family
Multiturn
Multiturn
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany