Baumer X 700 매뉴얼 - 페이지 3

{카테고리_이름} Baumer X 700에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer X 700 41 페이지. Absolute encoder profibus-dpv0 (with bus cover and ssi coupler)
Baumer X 700에 대해서도 마찬가지입니다: 매뉴얼 (26 페이지)

페이지 인쇄

Disclaimer of liability

The present manual was compiled with utmost care, errors and omissions reserved. For this reason

Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.

Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the

present information.

At any time we should be pleased receiving your comments and proposals for further improvement of the

present document.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.

Depending on encoder configuration and part number delivery is including:

• Encoder

• CD with describing file and manual (also available as download in the Internet)

1.2. Product assignment

Shaft encoder

Product

Product Code

GXP5W

0x28

X 700

0x28

GXP5W with the Product Code 0x28 is an absolute encoder with a CANopen interface and an implemented

application profile DSP417 (Application Profile for Lift Control Systems).

LIFT

Manual_GXP5_417_Lift_EN.doc

04.05.11

Device Name

Eds File

GXP5

GXP5_417.eds

GXP5

GXP5_417.eds

3/41

Product Family

Multiturn

Baumer IVO GmbH & Co. KG

Villingen-Schwenningen, Germany