Asus RT-AC1200G Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Router Nirkabel Asus RT-AC1200G. Asus RT-AC1200G 8 halaman. Snt recommended

Step 2

Changing the Default Username and Password

Your wireless router should turn on. There is an indicator light on the wireless router to indicate it is turned

on. Give the wireless router a few minutes to completely start.

You can now connect your computer to the wireless router in one of two different ways. Either you can

connect your computer to one of the yellow ethernet ports on the wireless router using another ethernet

cable (not included), or connect your computer wirelessly to the wireless router using the unsecured

"ASUS" wireless network the wireless router will automatically create.

Important! You won't have a working internet connection just yet. Only after you successfully completed

step 1 through 3 of this manual will you be able to use the internet.

Once you're connected to the wireless router via one of the two options above, you will have to open the

wireless router's configuration interface. You can do this by opening a browser on your computer and

navigate to the website: http://192.168.1.1.

You'll now be greeted with a website like the one below. Please make up a username and a good

password you will use later to login to the wireless router's configuration interface and enter them. Click

Next to continue.

Important! This username and password are only used to login to the configuration interface, and not to

connect to the wireless network you will create in the next step. You don't have to give these credentials to

anyone else.

If you need any further help with this step, please consult the product manual that came with your router.