Dovpo Ember 80 Kit Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat penguap Dovpo Ember 80 Kit. Dovpo Ember 80 Kit 8 halaman.

8.2 When in Temperature Control Mode, it will display

desired temperature value on the left and real-time

temperature on the upper right corner and puf f counter

on the bottom right corner .

Desired

Temperature

9. Reset Puff Counter

Reset the puff counter by pressing the fire button 3 times

quickly. The maximum puff is 999, it will go back to 0

when max out.

10. Adjust Preheat Power

When in Temperature Control Mode, hold both fire button

and "+" for 1.5s, the wattage value on the upper right

corner will be flashing, press "+" or "-" button to adjust

preheat power .

11. The device will change back to W attage Mode when

using non-temp controlled wire in Temperature Control

Mode.

12. Automatic Mode

A recommended wattage value will be set every time a

new atomizer is attached to the device. You can still

adjust wattage after the device gives you a recommen-

ded wattage.

Automatic Mode works only with Wattage Mode.

Resistance

600

0.3Ω

0.5Ω

1.0Ω

1.5Ω

Real-time Temperature

120℉

009

Puff Counter

Recommened Wattage

50W

30W

16W

12W